Page 1
KEYLESS ELECTRONIC BIKE LOCK TL-400KBL Security Made Effortless In order to continue serving our customers and providing the best products, our product information including our user manuals may receive updates from time to time. Please check our website for the User Manual latest user manuals and product materials.
Information & Safety Warnings 1 . 1 Introduction This user manual will guide you through the functions and usage of your TurboLock TL-400KBL Bike Lock. It is important that you follow all instructions and regard all notes that appear throughout this manual.
The substances contained inside the battery present chemical risks to the environment. The recommended disposal for any TurboLock TL-400KBL Bike Lock at its end-of-life is to dispose of the entire unit at or through an e-waste recycling center, program, or facility.
Lock Functions 2.1 Low Battery Notification The TL-400KBL features a low-battery notification (3 quick beeps). Charge the bike lock as soon as you receive this notification after the initial notification, the lock will only have enough power for approximately 50 uses before the batteries are fully depleted.
Make sure to slide the power switch to OFF before charging. After fully charging the TL-400KBL, disconnect it from the USB cable. To turn the lock on, slide Step 4 . the power switch ON and use the screwdriver to secure the battery compartment cover.
Make sure the bike lock has been fully charged with the power switch in the ON position. The TL-400KBL provides a variety of methods to unlock your bike, including one admin passcode and one user passcode that can be shared to those you trust. Each time the lock disengages to unlock the bike, the bike lock will beep and vibrate to indicate successful operation.
If you enter an incorrect passcode, the keypad will flash red twice and beep twice. If you enter an incorrect passcode three times in a row, the TL-400KBL will enter Lock-Out Mode for 15 minutes. During this time, the lock is unusable.
Default Admin Passcode: 123456 • The admin passcode can be used to unlock the TL-400KBL. It is also used to create user passcodes, reset the lock and activate the mute function. The TL-400KBL can only be reset with the admin passcode; therefore, it is important that you select a passcode that you will remember.
Step 4 . Before the keypad turns off, enter a new 5-digit passcode, then press the unlock button ‘ ’. Step 5 . Re-enter the newly created passcode, then press the unlock button ‘ ’. After the keypad light turns off, test the new passcode. TurboLock TL-400KBL...
The lock is now reset. All passcodes have been deleted and the admin passcode has been reverted to factory default. Test all old passcodes. They should no longer work. Change the default admin passcode immediately. (See Section 6 .2 Changing the Admin Passcode). TurboLock TL-400KBL...
Mute Mode has now been deactivated. To avoid entering Security Lock-Out Mode, be sure to press each key firmly and look for visual indication that each keypress was registered. The keypad will not emit sound until it has been un-muted. TurboLock TL-400KBL...
• When the low battery notification starts, recharge the batteries as soon as possible. • The TL-400KBL is IP65 water-resistant, it can withstand splashes and contact with water once • properly after proper installation. Do not let water and liquids get into the lock’s Battery Compartment.
The lock Make sure the Battery Compartment doesn’t work cable is fully connected to the cable inside The lock isn’t receiving power the lock. If it is properly connected and there is still a problem, contact customer service. TurboLock TL-400KBL...
Section 13 Warranty Your TurboLock TL-400KBL (“Product”) includes a One-Year Limited Hardware Warranty (“Warranty”). The Warranty covers product defects in materials and workmanship under normal use. This Warranty is limited to residents of the United States and Canada only and is available only to original purchasers. This Warranty gives you specific legal rights and you may also have other rights which vary from state to state.
Page 19
SHALL UNDER NO CIRCUMSTANCES EXCEED THE ACTUAL AMOUNT PAID BY YOU FOR THE DEFECTIVE PRODUCT, NOR SHALL WE UNDER ANY CIRCUMSTANCES BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL OR PUNITIVE DAMAGES OR LOSSES, WHETHER DIRECT OR INDIRECT. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
Need help?
Do you have a question about the TL-400KBL and is the answer not in the manual?
Questions and answers