Voxelab Polaris Quick Start Manual page 18

1.Copy the ".fdg" file to the USB stick from the computer. It is better to remove USB
stick to avoid file damage after exiting the computer safely.
Print
2. Pull USB stick into the USB stick port in the Polaris. Click [Print] in the touched
screen and open files list. Only showed in the list, the files are recognized.
Note: USB stick permit to remove in the process of printing.
Do not pour the residual resin back to the resin bottle with unused resin.
The waste resin can be poured into the hermetic bag to encapsulate and
exposure to the sun until solidify all resin.
If stop print within a period of time, pour the residual resin back into the resin
bottle and save it to avoid light. If there are some thin solidified pieces in the
resin, it must to filter before storage.
Do not clear the solidified pieces in the resin box by using sharp mental scraper
knife or other sharp instrument to avoid the damage of FEP film.
If there is some resin dropped in the touched screen, it must to clear by
non-woven fabrics; or the resin have been solidified, please clear it by
non-woven fabrics and anhydrous alcohol.
Please keep two places showed in the picture clear. No dust and fingerprint.
Load printed files
Tool Systerm
Mainteness
Model-01
Model-03
16
Model-02
Model-04