Intel SRPM8 Quick Start Manual page 17

Table 3. Front Controls and Indicators
Item Feature
Front Panel
A. Power switch
B. Reset switch
C. NMI switch
D. Power LED (green)
E. Power fault LED (yellow)
F. Cooling fault LED (yellow)
G. Drive fault LED (yellow)
H. Front panel LCD
Status LEDs for SCSI Drives in Hot-docking Bays
I. Drive power LED (green)
J. Drive activity LED (green)
K. Drive fault LED (yellow)
CD-ROM Drive
L. Open/close button
M. Activity LED
N. Volume control
O. Headphone jack
3.5-inch Diskette (Floppy) Drive
P. Activity LED
Q. Ejector button
Description
When pressed, it turns on or off the server. The +5 V standby voltage
is ON whenever the server is plugged in.
When pressed, it resets the server and causes the power-on self test
(POST) to run.
When pressed, it causes a nonmaskable interrupt. This switch is
recessed behind the front panel to prevent inadvertent activation. It
must be pressed with a narrow tool (not supplied).
When lit continuously, it indicates the presence of DC power in the
server. When not lit, it indicates power is turned off or power source is
disrupted.
When lit continuously, it indicates a power supply failure.
When flashing, it indicates a fan failure.
When lit continuously, it indicates an asserted fault status on one or
more hard disk drives in the hot-docking bay. When flashing, it
indicates drive reset in progress.
Displays information about processor type and failure codes.
When lit continuously, it indicates the presence of the drive and power
on the drive.
Indicates drive activity.
When lit continuously, it indicates an asserted fault status on one or
more hard disk drives in the hot-docking bay. When flashing, it
indicates drive reset in progress.
When pressed, it opens or closes the CD-ROM tray.
When lit, it indicates the drive is in use.
It adjusts the volume of headphones or speakers.
It provides a connection for headphones or speakers.
When lit, it indicates the drive is in use.
When pressed, it ejects the diskette.
SRPM8 Server System Quick Start Guide 17