Table of Contents
Advertisement
4.
Remove the board from the computer (4).
Reverse this procedure to install the USB board.
USB door
To remove the USB door, use this procedure and illustration.
Table 5-11
USB door description and part number
Description
USB door, left
USB door, right
Before removing the USB door, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover
3.
Remove the battery (see
Remove the USB door:
Insert a removal tool under the back of the USB door, and then lift to remove the USB door from the
▲
computer.
(Preparation for disassembly on page
(Bottom cover on page
Battery on page
23).
22).
Component replacement procedures
Spare part number
M35758-001
M35759-001
22).
33
Advertisement
Table of Contents
