Solid-State Drive; Speakers - HP Chromebook 14 Maintenance And Service Manual

Solid-state drive

To remove the M.2 solid-state drive, use this procedure and illustration.
Table 5-3 Solid-state drive description and part number
Description
128 GB, PCIe
Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover
3. Remove the battery (see
Remove the solid-state drive:
1. Remove the Phillips M2.0 × 3.0 screw (1) that secures the drive to the computer.
2. Pull the drive away from the socket to remove it (2).
To install the solid-state drive, reverse the removal procedures.
NOTE: Solid-state drives are designed with a notch to prevent incorrect insertion.

Speakers

To remove the speakers, use this procedure and illustration.
Table 5-4 Speaker description and part number
Description
Speaker Kit
Before removing the speakers, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover
3. Remove the battery (see
(Preparation for disassembly on page
(Bottom cover on page
Battery on page 23).
(Preparation for disassembly on page
(Bottom cover on page
Battery on page 23).
22).
22).
Component replacement procedures
Spare part number
M11040-005
22).
Spare part number
M00436-001
22).
25