Right Log Installation; Right Twig Installation - FireplaceXtrordinair 21 TRV GSR2 Owner's Manual

Right Log Installation

The right log has two holes that accept the pins on the burner and rear log. When placed correctly there will
be a minimal gap between the two logs. Make sure the bottom is placed so no burner ports are blocked
and there is a gap to the back wall.
VIEW
FROM
ABOVE

Right Twig Installation

The right twig rests on the burner and leans against the indent on the right log. Install the twig as shown
below. The bottom of the twig is placed one inch to the right of the center screw on the burner.
© Travis Industries
Maintenance
3/19/2021 - 1422
NOTE: Make sure the right log
does not rest against the back
of the firebox (or liner). If it
does, it will block light from the
accent light, creating a large
shadow. You may need to re-
adjust the logs to insure a ¾"
gap from the back.
21TRV GSR2 Owners
25