Parameter Setting Display - Bushnell 119932C Instruction Manual

Parameter Setting Display

The settings for each parameter are shown on the display screen of your Prime
Trail Camera. Only one setting is displayed at a time, starting with the current
setting for the parameter when it is first selected (Fig. 6a). To change the setting,
use the UP/DOWN keys to display the new setting you want (Fig. 6b), then press
OK to "Execute" (make the actual change to this setting). If you want to confirm this
setting is now the current one, just press the RIGHT key to scroll to the next
parameter, then press LEFT to go back again to the previous one. You should see
the parameter setting you just made.
Fig. 6: Selecting Parameter Settings
(6a)
Press Menu
Press DOWN to select new setting for the highlighted parameter
(6b)
Press OK to confirm and execute the new setting
11