Bushnell 119932C Instruction Manual page 28

original default setting for that parameter.
Field Scan (Time Lapse) not working properly
Make sure that the stop and start times of Field Scan "A" and "B" do not overlap
1.
(for example, do not set the start time of "B" to 8AM if the stop time of "A" is 10AM).
Do not mix battery types-use ALL lithium or ALL alkaline.
28
CAUTION!: DO NOT USE the 1s Interval setting for Video at
night at a feeder or similar environment. It may cause the LEDs
to continue firing over a long period of time, which may overheat
and shorten the operating life of the internal electronic compo-
nents.
Do not mix old and new batteries.
Rechargeable batteries are not recommended.