Advertisement
WIRING INSTRUCTIONS
■ APPLICABLE WIRE SIZE mm
:
• Solid
0.2 to 1.0 mm
(0.55 to 1.12 dia.)
2
• Stranded: 0.2 to 1.5 mm
2
(Tinning wire ends may cause contact failure and therefore
is not recommended.)
• Ferruled:
Unsheathed: 0.25 to1.5 mm
Sheathed: 0.25 to 0.75 mm
• Expose wire conductors by 10 mm (0.39").
Stripped length
10mm
■ CONNECTION PROCEDURE
Insert the wire end until it comes to a full stop while push-
ing slot with the tip of a screw driver as shown below. Be
sure wire insulation is not inside the terminal.
EXTERNAL DIMENSIONS
M-SYSTEM WARRANTY
M-System warrants such new M-System product which it manufactures to be free from defects in materials and workmanship during the 36-month period following the date that such
product was originally purchased if such product has been used under normal operating conditions and properly maintained, M-System's sole liability, and purchaser's exclusive
remedies, under this warranty are, at M-System's option, the repair, replacement or refund of the purchase price of any M-System product which is defective under the terms of this
warranty. To submit a claim under this warranty, the purchaser must return, at its expense, the defective M-System product to the below address together with a copy of its original
sales invoice.
THIS IS THE ONLY WARRANTY APPLICABLE TO M-SYSTEM PRODUCT AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. M-SYSTEM SHALL HAVE NO LIABILITY FOR CONSEQUENTIAL, INCIDENTAL OR
SPECIAL DAMAGES OF ANY KIND WHATSOEVER.
M-System Co., Ltd., 5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN, Phone: (06) 6659-8201, Fax: (06) 6659-8510, E-mail: info@m-system.co.jp
2
2
Screw Driver
Power wire
unit: mm (inch)
27.5 (1.08)
1
20
INPUT PIN ASSIGNMENT
PIN No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
120 (4.72)
109 (4.29)
R3S-RS4A
FUNCTION
INA1
INB1
INb1
SLD
INA2
INB2
INb2
SLD
NC
NC
INA3
INB3
INb3
SLD
INA4
INB4
INb4
SLD
SLD
SLD
POSITIONING
GUIDE
EM-8936
P. 3 / 3
Advertisement
