BOMANN KG 7334 Instruction Manual page 20

 Avoid the installation:
near heaters, next to a stove, direct sunlight or
-
any other heat sources;
at locations with high humidity (e.g. outdoors,
-
bathroom), as metal parts would be suscepti-
ble to corrosion under such circumstances;
near volatile or flammable materials (e.g. gas,
-
fuel, alcohol, paint, etc.), in rooms which may
have poor air circulation (e.g. garages).
Do not expose the appliance any weather.
-
Levelling the appliance
Slight unevenness in the floor can be leveled out
using the front feet.
Check whether the appliance is leveled horizontally.
If the unit is not in balance, the feet must be adjust-
ed.
Aligning the appliance doors
After transport or after loading the door storage
racks, the upper appliance doors may have to be
realigned. For this the supplied washers (type C)
must be used.
WARNING:
Always use suitable tools to align the appliance
doors. Otherwise there is a risk of crushing your fin-
gers.
 Make sure that the appliance is levelled.
 If the top edges of the upper appliance doors are
not in a line, lift the appliance door slightly and
use a suitable tool to insert the washer between
the underside of the door and the middle hinge.
Attaching the rubber blocks
There is a rubber block on each appliance door.
They function as spring to relieve impact when door
closes.
Do not pull the rubber blocks! If the rubber blocks on
the appliance doors are missing, insert a new rubber
block (included in delivery).
Electrical connection
WARNING:
 The installation to the mains supply must conform
to the local standards and regulations.
 Improper connection may cause to an electric
shock!
 Do not modify the appliance plug. If the plug does
not fit properly to the outlet, let install a proper
outlet by an authorized specialist.
 The accessibility of the power plug must be en-
sured to disconnect the appliance from the power
supply in case of emergency.
20