2-2-7. LED-430 Board
Removal
1. Remove the top cover assembly.
(Refer to steps 1 to 3 in Section 1-4-1.)
2. Disconnect the harness from the connector
CN901 on the LED-430 board.
3. Remove the two screws, and remove the
LED-430 board.
Installation
4. Reinstall the LED-430 board in the reverse
order of steps 2 and 3.
5. Reattach the top cover assembly.
(Refer to Section 1-4-1.)
PCS-G70N/G70NP/G70NP2
PCS-G70S/G70SP
LED-430 board
PSW3 x 6
CN901
Top cover assembly
Harness
2-9 (E)