Table of Contents
Advertisement
2-2-4. DSP-113 Board
Removal
1. Remove the top cover assembly.
(Refer to steps 1 to 3 in Section 1-4-1.)
2. Disconnect the harness and the flexible flat
cable from the connectors (CN1205 and
CN1501) on the DSP-113 board.
3. Remove the screw, and remove the bracket.
4. Remove the four screws and the four connec-
tor screws.
5. Remove the DSP-113 board from the connec-
tor CN2501 on the CPU-382 board in the
direction of the arrow.
6. Remove the MIC jack shield plate on the
DSP-113 board.
Installation
7. Reinstall the DSP-113 board in the reverse
order of steps 2 to 6.
n
Be sure to connect the connector CN101 on
the DSP-113 board to the connector CN2501
on the CPU-382 board.
8. Reattach the top cover assembly.
(Refer to Section 1-4-1.)
2-6 (E)
PSW3 x 6
Bracket
CN1205
DSP-113
board
CN101
CN2501
CPU-382 board
MIC jack shield
plate
PSW3 x 6
CN1501
Connector
screws
BVTP3 x 8
PCS-G70N/G70NP/G70NP2
PCS-G70S/G70SP
Advertisement
Table of Contents
