• DISCONNECT power supply cord from the outlet
before servicing.
• Replace all panels and parts before operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal injury, death or
electrical shock.
• Be careful when you work on the electric range
handling the sheet metal part.
- Sharp edge may be present and you can cut yourself.
1. Open the oven door to its fully down position.
2. Pull the oven door gasket clips out of the liner holes until all of the clips
are removed.
COMPONENT ACCESS
REMOVING THE OVEN DOOR GASKET
WARNING
CAUTION
Door gasket
3. Pull the ends of the gasket out of the liner holes.
REASSEMBLY NOTE: When you install the new gasket, make sure that
all of the clips are seated in their liner holes, and that the ends of the
gasket are pushed fully into their holes. Use the pointed end of a pencil to
push the gasket ends into the holes.
-3-15-
Gasket clip
Liner Hole