• DISCONNECT power supply cord from the outlet
before servicing.
• Replace all panels and parts before operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal injury, death or
electrical shock.
• Be careful when you work on the electric range
handling the sheet metal part.
- Sharp edge may be present and you can cut yourself.
1. Turn off the electrical supply going to the range.
2. Remove the oven door from the range
(see page 3-14 for the procedure).
3. Pull the range away from the wall so you can access the back of the
unit.
4. Remove the lamp, controller and back cover. (See the page 3-2)
5. Raise the cooktop assembly (See the page 3-6 For the procedure).
NOTE: put the cooktop assembly down on the side panel which is not
detached.
6. Remove 4 screws from the side panel.
COMPONENT ACCESS
REMOVING THE OVEN DOOR GASKET
WARNING
CAUTION
7. Remove 6 screws from the
side pandel
-3-16-