Non-Host-Adapter Specific; Host-Adapter Specific - Dell PowerEdge 4200 Series User Manual

Dell poweredge 4200 servers: user guide
Hide thumbs Also See for PowerEdge 4200 Series:
Table of Contents

Advertisement

Non–Host-Adapter Specific
000 Failed ParseDriverParameters call
A call to NetWare's ParseDriverParameters routine has
failed for some unknown reason. The command line con-
tains errors, or you pressed <Esc> at the port or slot prompt.
001 Unable to reserve hardware, possible
conflict
The driver failed in its attempt to reserve the host adapter's
hardware settings (that is, direct memory access [DMA]
and interrupt request [IRQ] settings). Another card in your
system may be causing a conflict with the host adapter.
002 NetWare rejected card Failed AddDisk-
System call
The driver failed in its attempt to register the host adapter
with NetWare. The file server may not have enough
memory.
003 Invalid command line option entered >
option
An invalid option was entered on the command line. The
invalid option that was entered is also displayed.
004 Invalid command line, please enter
correctly
The driver was unable to understand the command line
options you entered. Be sure you have entered these
options correctly.
3-20
Dell PowerEdge 4200 Systems User's Guide

Host-Adapter Specific

200 No host adapter found for this driver
to register
No Adaptec 78xx host adapter was found in your com-
puter for the driver to register. Be sure the host adapter is
properly configured and properly seated in the slot.
203 Invalid 'device' setting
You have entered an invalid slot setting on the command
line. You can only enter slot numbers for valid host
adapters. If you load without the slot option, you will be
prompted to enter a valid value.
204 Invalid 'verbose' setting, use 'y'
You can only enter y for this option (verbose = y).
205 Invalid 'removable' setting, use 'off'
You can only enter off for this option (removable = off).
206 Invalid 'fixed_disk' setting, use 'off'
You can only enter off for this option (fixed_disk = off).
208 SCSI present but not enabled/configured
for PCI
A host adapter is present, but its bus or device entry has
not been enabled.

Advertisement

Table of Contents
loading

Table of Contents