Security Menu Categories; Supervisor Password Is; User Password Is; Figure 4-4. Security Menu Of The System Setup Program - Dell PowerEdge 4200 Series User Manual

S
ecurity Menu Categories
To access the Security menu (see Figure 4-4), use the
arrow keys to highlight Security. The following sub-
sections describe the System Setup categories in the
Security menu

Supervisor Password Is

This category indicates whether the supervisor password
is disabled or enabled. When Enabled is displayed, the
supervisor password has already been set and is required
Dell System PowerEdge 4200 Setup
Main Advanced
Supervisor Password is

User Password is

Set Supervisor Password
Set User Password
Password on boot
Diskette access
System backup reminder
Virus check reminder
F1 Help
ESC Exit

Figure 4-4. Security Menu of the System Setup Program

Security Exit
Disabled
Disabled
[Press Enter]
[Press Enter]
[Disabled]
[User]
[Disabled]
[Disabled]
Select Item -/+
Select Menu Enter
for full access to the System Setup program (see
Table 4-2). The default is Disabled.
User Password Is
This category indicates whether the user password is dis-
abled or enabled. When Enabled is displayed, the user
password has already been set and is required during the
boot routine. Unlike the supervisor password, the user
password does not allow you full access to the System
Setup program (see Table 4-2 later in this chapter). The
default is Disabled.
Pressing
a dialog box for entering
the supervisor (7-digit,
alphanumeric)
This password gives full
access to the Setup menu.
The
must
the user password can be
set.
Change Values
Select Submenu
Using the System Setup Program
BIOS Version A XX
Item-Specific Help
< >
displays
ENTER
password.
supervisor password
be enabled before
F9 Setup Defaults
F10 Previous Values
4-9