Entering The System Setup Program; Table 4-1. System Setup Keys - Dell PowerEdge 4200 Series User Manual

•
Help
The box on the right side of each screen displays
help information for the category whose field is cur-
rently highlighted.
•
Key Functions
The area at the bottom of each screen lists the keys
and their specific functions, which are also listed in
Table 4-1.

Table 4-1. System Setup Keys

Key(s)
or
or
or
or
or
4-2 Dell PowerEdge 4200 Systems User's Guide
Action
Displays the general help
window.
Displays the Exit menu unless
you are in a submenu. If you
are in a submenu, pressing the
<Esc> key displays the par-
ent menu.
Moves the cursor to the next
menu in each direction.
Moves the cursor up or down.
Moves to the next field.
Moves to the previous field.
Moves the cursor to the top or
bottom of the window.
Decrements the value of the
field.
Table 4-1. System Setup Keys
Key(s)
or
or
E
ntering the System Setup
Program
You can enter the System Setup program by pressing the
<F2> key when prompted during the boot routine.
If you wait too long, your operating system begins to load
into memory. In this case, let the system complete the
load operation; then restart the system and try again.
NOTE: To ensure an orderly system shutdown, consult
the documentation that accompanied your operating
system.
(continued)
Action
Increments the value of the
field.
Sets default configuration val-
ues for the current menu.
Loads the default System
Setup values for all menus.
Sets previous configuration
values for the current menu.
Executes the selected
command.
Refreshes the screen.