Maximum Errors Allowed - Dell 4100 Installation And Troubleshooting Manual

.
Option Limit
NUMBER OF TIMES TO REPEAT TEST(S)

MAXIMUM ERRORS ALLOWED

PAUSE FOR USER RESPONSE
OUTPUT DEVICE FOR STATUS MESSAGES
OUTPUT DEVICE FOR ERROR MESSAGES
Options
Table 5-1 lists all of the possible values for each global
parameter of . A brief description of each param-
OPTIONS
eter follows the table. To change
press the < >, the left- and right-arrow keys, or
SPACEBAR
the plus (+) and minus (–) keys.
Number of Times to Repeat Test(s)
This parameter specifies the number of times the tests run
when you select . To change the default, type in the
RUN
desired value. If you type 0 (zero), the tests will run
indefinitely.
Maximum Errors Allowed
This parameter specifies the maximum number of errors
that can occur before testing is stopped. The error count
begins from zero each time you run a subtest or test
group individually or each time you select
of them. To change the default, type in the desired value.
If you type 0 (zero), you are specifying that there be no
5-6 Dell PowerEdge 4100/180 and 4100/200 Systems Installation and Troubleshooting Guide
Table 5-1. Option Parameters
Possible Values
through
0001
< > and <
CTRL
through
0000
The default is
,
YES NO
Allows you to decide whether tests will wait for user input.
The default is
DISPLAY, PRINTER, FILE
If you have a printer attached to the computer, you can use it to print
the status messages, if any, that are generated when a test runs. (The
printer must be turned on and in the online mode to print.) If you select
, the messages are printed to a file named result in diskette drive
FILE
A. The default is
DISPLAY, PRINTER, FILE
This parameter has the same effect as the
MESSAGES
The default is
parameters,
OPTIONS
to run all
ALL
, or , which loops indefinitely until you press the
9999 0000
> keys. The default is
BREAK
, where means that there is no error limit.
9999 0000
.
1
to wait for user input.
YES
.
DISPLAY
parameter, except that it pertains only to error messages.
.
DISPLAY
limit on the number of errors that can occur—testing will
not be stopped, regardless of the number of errors.
.
1
OUTPUT DEVICE FOR STATUS