Using The Cutting Unit Service Latch - Toro Groundsmaster 3500-D Operator's Manual

Using the Cutting Unit
Service Latch
When servicing the cutting units, use the service latch
to prevent injury.
1. Center the cutting unit sidewinder with the
traction unit.
2. Raise the cutting unit to the transport position.
3. Engage the parking brake and shut off the
machine.
4. Release the latch rod from the front carrier-frame
retainer (Figure 33).
Figure 33
1. Service-latch hook
5. Lift the outside of the front cutting units and
place the latch over the frame pin mounted on
the front of the operator's platform
6. Sit on the operator's seat and start the machine.
7. Lower the cutting units to the mow position.
8. Turn off the machine and remove the key.
9. Reverse this procedure to unlatch the cutting
units.
g031614
(Figure 33).
39