Table of Contents
Advertisement
SECTION 6: MAINTENANCE
To reduce risk of shock or
accidental startup, always
disconnect machine from
power before adjustments,
maintenance, or service.
Schedule
For optimum performance from this machine, this
maintenance schedule must be strictly followed.
Ongoing
To minimize your risk of injury and maintain proper
machine operation, shut down the machine imme-
diately if you ever observe any of the items below,
and fix the problem before continuing operations:
•
Loose mounting bolts.
•
Damaged spindle shaft.
•
Damaged buffing wheels.
•
Worn or damaged wires.
•
Any other unsafe condition.
Weekly Maintenance
•
Worn or damaged cord.
•
Worn ON/OFF switch.
•
Worn variable-speed dial.
Monthly Check
•
Clean/vacuum dust buildup off motor.
-22-
Cleaning
Cleaning the Model T32003 is relatively easy.
Vacuum excess debris and wipe off the remaining
dust with a dry cloth. Wipe down spindle with a
non-staining lubricant after cleaning.
To clean buffing wheels, use a buffing wheel rake
to remove dried compound. Guide the rake across
the spinning buffing wheel using light pressure, as
shown in Figure 22.
Figure 22. Removing compound from buffing
wheel with buffing wheel rake.
Lubrication
The bearings inside the Model T32003 are sealed
and permanently lubricated. Simply leave them
alone unless they need replacing.
Model T32003 (Mfd. Since 02/20)
Advertisement
Table of Contents
