Troubleshooting Table; Problems With Operation - Hanseatic HGU6082D14J7735EI User Manual

Troubleshooting table

Malfunctions can occur in all electrical appliances. This does not necessarily mean
there is a defect in the appliance. For this reason, please check the tables to see if you
can correct the malfunction.
WARNING!
Risk of electric shock in case of improp-
er repair!
Conducting improper repairs to the
dishwasher puts the person carrying
out the repairs and the user in danger.
■ Only authorised specialists may re-
pair the dishwasher. If in doubt,
contact our service department
(see page EN-41).
■ Only carry out the actions which are
described in this user manual.
■ Never repair defective dishwashers
– or dishwashers which you presume
to be defective – yourself. You can en-
danger yourself and subsequent users.

Problems with operation

Problem
The dishwasher cannot
be switched on.
The selected dishwash-
ing programme will not
start or it stops.
Risk of damage!
Improper handling of the dishwasher
can lead to property damage and to
damage to the dishwasher.
■ If water overfl ows, switch off the wa-
■ If the water has overfl owed, remove
Possible cause
The mains plug has not
been inserted into a socket.
There is no voltage being
supplied through the socket.
The dishwasher's door is not
closed properly.
The water tap is not on
properly.
The inlet hose is defective.
There is a risk of overflowing.
The electrical water stop
system has been activated.
Troubleshooting table
NOTICE
ter supply immediately and then con-
tact the service team (see page E N-41).
any water standing in the dishwasher
before restarting a dishwashing pro-
gramme.
Solution
Insert the mains plug into the
socket.
Check the fuse. Check the socket
by connecting another device.
Close the dishwasher door.
Turn the water tap on completely.
Contact our Service Centre
(see page EN-41).
Page EN-37