Bartscher Aurora 22 Original Instruction Manual page 18

Installation and operation
8. Open the cover of the thermal pump jug and remove the pump's tube.
9. Open the thermal pump jug's cover to the side.
10. Place the open thermal pump jug on the bottom plate, in such a manner that the
thermal pump jug opening is located below the drip opening of the filter basket.
11. Switch the appliance on with the ON/OFF switch.
The red operation indicator light in the ON/OFF switch comes on.
The green heating-up indicator light will be lit and will remain on during the entire
brewing process.
Coffee will begin to brew. After a short time, the hot coffee will start flowing into the
thermal pump jug.
When the brewing process is finished, the coffee machine automatically turns itself
off and the green heating indicator light goes off.
The coffee is ready to be served.
12. Remove the thermal pump jug from the bottom plate.
13. Re-insert the pump tube back into the can.
14. Close the pump lid until the buttons click into place.
EN
16 / 24 190187