Operation - Bartscher Aurora 22 Original Instruction Manual

Installation and operation
Power supply connection
•
Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
•
Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
•
The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
•
Do not use the appliance with an external timer or remote control.
5.2

Operation

WARNING!
Risk of burns!
The filter basket and the coffee dregs are hot after the brewing process.
In order to remove the coffee dregs, remove the filter basket carefully.
Risk of burns!
During the brewing a small amount of hot steam is produced.
Maintain caution when removing the thermal pump jug from the hob.
ATTENTION!
Never fill hot water into the water tank.
Do not fill water into the hot device. Wait until it has cooled down.
Before the first use
1. Before using the coffee machine for the first time, circulate water 2 or 3 times
without coffee, to rinse the appliance (section "Coffee Preparation").
2. Due to the design of the appliance, after the first use, a small amount of water
remains in the water container. Take this into consideration when refilling the
tank with water.
190187
EN
13 / 24