Procedure - Nortel Contivity 4500 Getting Started

Procedure

1.
2.
Connect the serial cable from the Switch's serial cable port to a PC
communications port.
Turn on the Switch. It can take the system approximately 3 minutes to
start up.
Using a terminal emulation program, such as Hyper Terminal, press Enter
and then supply a user name and password. The factory default user name
and password are:
User name: admin
Password: setup
A menu appears that allows you to enter the following:
• Management IP address
• IP subnet mask
• Gateway IP address (optional)
Assigning a System Identity
3-7