Nortel Contivity 4500 Getting Started page 42

Getting Started with the Contivity Extranet Switch 4500
A sample display follows:
Main Menu:
1) Interfaces
2) Administrator
3) Private Default Route Gateway*
4) Public Default Route Gateway*
5) Create A User Management Tunnel (IPsec)
6) Restricted Management Mode
7) Allow HTTP Management
8) Check Point Firewall Options
9) Shutdown
P) Configure Serial Port
C) Controlled Crash
R) Reset System to Factory Defaults
E) Exit, Save and Invoke Changes
Please select a menu choice (1 - 9,P,C,R,E): 1
Figure 3-3.
Follow the screen prompts. Some of the descriptions of the fields required to
3.
complete this procedure are in the section
Requirements" on page
After you complete the configuration, type E to Exit. You can then manage
4.
the Switch from a Web browser.
IMPORTANT: This Administrator's Password is also the Primary
Administrator's Password. This password guarantees access to the Switch via
the serial port or a Web browser.
3-8
* Type 0.0.0.0 to delete.
Sample Serial Interface Display
"Startup Configuration
3-2.
10.0.0.10
TRUE