Dell XPS M1330 Owner's Manual page 88

U X I L I A R Y D E V I C E F A I L U R E
A
For an external mouse, check the cable connection. Enable the Pointing
Device option in the system setup program (see "Using the System Setup
Program" on page 165). If the problem persists, contact Dell (see "Contacting
Dell" on page 155).
B A D C O M M A N D O R F I L E N A M E
correctly, put spaces in the proper place, and used the correct pathname.
C A C H E D I S A B L E D D U E T O F A I L U R E
microprocessor has failed. Contact Dell (see "Contacting Dell" on page 155).
C D D R I V E C O N T R O L L E R F A I L U R E
commands from the computer (see "Drive Problems" on page 84).
D A T A E R R O R —
page 84).
D E C R E A S I N G A V A I L A B L E M E M O R Y
faulty or improperly seated. Reinstall the memory modules and, if necessary,
replace them (see "Memory" on page 127).
I S K F A I L E D I N I T I A L I Z A T I O N
D C :
hard drive tests in the Dell Diagnostics (see "Dell Diagnostics" on page 79).
D R I V E N O T R E A D Y
can continue. Install a hard drive in the hard drive bay (see "Hard Drive" on
page 119).
E R R O R R E A D I N G
ExpressCard. Reinsert the card or try another card (see "Using ExpressCards"
on page 59).
E X T E N D E D M E M O R Y S I Z E H A S C H A N G E D
NVRAM does not match the memory installed in the computer. Restart the
computer. If the error appears again, contact Dell (see "Contacting Dell" on
page 155).
H E F I L E B E I N G C O P I E D I S T O O L A R G E F O R T H E D E S T I N A T I O N D R I V E
T
that you are trying to copy is too large to fit on the disk, or the disk is full. Try
copying the file to a different disk or use a larger capacity disk.
A F I L E N A M E C A N N O T C O N T A I N A N Y O F T H E F O L L O W I N G C H A R A C T E R S
Do not use these characters in filenames.
> | —
G A T E A 2 0 F A I L U R E
modules and, if necessary, replace them (see "Memory" on page 127).
88
Troubleshooting
The touch pad or external mouse may be faulty.
—
—
—
The hard drive cannot read the data (see "Drive Problems" on
—
—
The operation requires a hard drive in the bay before it
—
P C M C I A C A R D —
A memory module may be loose. Reinstall the memory
—
Ensure that you have spelled the command
The primary cache internal to the
—
The CD drive does not respond to
One or more memory modules may be
The hard drive failed initialization. Run the
The computer cannot identify the
The amount of memory recorded in
—
The file
—
: \ / : * ? " <