3 Click Properties→ Ports. For a parallel printer, ensure that the Print to the
following port(s): setting is LPT1 (Printer Port). For a USB printer, ensure
that the Print to the following port(s): setting is USB.
1 Click Start
2 If the printer is listed, right-click the printer icon.
3 Click Properties and click Ports.
4 Adjust the settings, as needed.
E I N S T A L L T H E P R I N T E R D R I V E R
Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
If you need technical assistance for your scanner, contact the scanner's
H E C K T H E S C A N N E R D O C U M E N T A T I O N
setup and troubleshooting information.
N L O C K T H E S C A N N E R
E S T A R T T H E C O M P U T E R A N D T R Y T H E S C A N N E R A G A I N
H E C K T H E C A B L E C O N N E C T I O N S
See the scanner documentation for cable connection information.
Ensure that the scanner cables are securely connected to the scanner and
E R I F Y T H A T T H E S C A N N E R I S R E C O G N I Z E D B Y
1 Click Start→ Control Panel→ Printers and Other Hardware→ Scanners
2 If your scanner is listed, Windows recognizes the scanner.
→ Control Panel→ Hardware and Sound→ Printer.
See the printer documentation for
Ensure that your scanner is unlocked.
See the scanner documentation for
I C R O S O F T
I N D O W S