Dell Vostro 1500 Owner's Manual page 153

NOTICE:
To help prevent damage to the computer, perform the following steps
before you begin working inside the computer.
1 Ensure that the work surface is flat and clean to prevent the computer
cover from being scratched.
2 Turn off your computer (see "Turning Off Your Computer" on page 151).
NOTICE:
To disconnect a network cable, first unplug the cable from your computer,
and then unplug it from the network connector.
3 Disconnect any telephone or network cables from the computer.
4 Disconnect your computer and all attached devices from their electrical
outlets.
NOTICE:
To help prevent damage to the system board, remove the battery from the
battery bay before you service the computer.
NOTE:
To avoid damage to the computer, use only the battery designed for this
particular Dell computer. Do not use batteries designed for other Dell computers.
5 Turn the computer over.
6 Slide and click the battery release latches.
7 Slide the battery out of the battery bay.
1 battery
1
2 battery release latches (2)
Adding and Replacing Parts
2
153