Dell Vostro 1500 Owner's Manual page 85

8 See "Enabling the Display Settings for a TV" on page 85 to ensure that the
computer recognizes and works properly with the TV.
Enabling S/PDIF Digital Audio
1 Double-click the speaker icon in the Windows notification area.
2 Click the Options menu and then click Advanced Controls.
3 Click Advanced.
4 Click S/PDIF Interface.
5 Click Close.
6 Click OK.
Enabling the Display Settings for a TV
NOTE:
To ensure that the display options appear correctly, connect the TV to the
computer before you enable the display settings.
Windows XP
1 Click the Start button, point to Settings, and then click Control Panel.
2 Double-click Display and click the Settings tab.
3 Click Advanced.
4 Click the tab for your video card.
NOTE:
To determine the type of video card installed in your computer, see the
Windows Help and Support Center. To access the Help and Support Center, click
→
Start Help and Support. Under Pick a Task, click Use Tools to view your computer
information and diagnose problems. Then, under My Computer Information, select
Hardware.
5 In the display devices section, select the appropriate option for using
either a single display or multiple displays, ensuring that the display
settings are correct for your selection.
Windows Vista
1 Click the Windows Vista Start button
click Appearance and Personalization.
2 Under Personalization, click Adjust Screen Resolution.
The Display Properties window appears.
,
click Control Panel, and then
Using Multimedia
85