Table of Contents
Advertisement
3.6.1 Tubular armrest, height-adjustable, swiveling
Removing
1. Raise the armrest and pull it upwards out of the holder.
Fitting
1. Push the armrest into the holder.
Adjusting the height
1. Pull the armrest out of the holder.
2. Loosen the screw on the tube of the armrest and screw
it back in at the desired height.
3. Push the armrest back into the holder.
4. Perform the setting on both sides.
Swiveling
1. Raise the armrest a little.
2. Swivel it outwards.
1648855-D
3.6.2 Armrest, stepless height adjustable, removable
Removing
1. Apply the parking brake on both sides.
2. Previously press on the locking mechanism A located
at the bottom of the armrest vertical bracket (if so
equipped).
3. Pull the armrest by the arm cushion out of the holder.
4. To adjust how easy or difficult it is to pull the armrest
out of the holder, change the degree to which the
screws D are tightened.
Fitting
1. Push the armrest into the holder.
Product Overview
19
Advertisement
Table of Contents
