Tubular Armrest, Height-Adjustable, Swiveling; Armrest, Stepless Height Adjustable, Removable - Invacare MyOn HC User Manual

Invacare® MyOn® HC

3.7.1 Tubular armrest, height-adjustable, swiveling

Removing
1. Raise the armrest and pull it upwards out of the holder.
Fitting
1. Push the armrest into the holder.
Adjusting the height
1. Pull the armrest out of the holder.
2. Loosen the screw on the tube of the armrest and screw
it back in at the desired height.
3. Push the armrest back into the holder.
4. Perform the setting on both sides.
Swiveling
1. Raise the armrest a little and swivel it outwards.
24

3.7.2 Armrest, stepless height adjustable, removable

Removing
1. Previously press on the locking mechanism A located at
the bottom of the armrest vertical bracket.
2. Pull the armrest by the arm cushion out of the holder.
3. To adjust how easy or difficult it is to pull the armrest
out of the holder, change the degree to which the
screws D are tightened.
Fitting
1. Push the armrest into the holder.
Adjusting the height
1. Loosen the screw B with 5 mm Allen key in the groove
C of the armrest tube.
2. Move the armrest upwards or downwards until you
reach the desired height, while keeping screw B in
place (at the top edge of the holder).
1587473-B