Table of Contents
Advertisement
1. Remove the backrest cushion A.
2. Loosen the hook and loop strips B on the rear of the
backrest cover by simply pulling on them.
3. Tighten or loosen the strips as required then reattach
them.
WARNING!
Risk of tipping
If the bands are set very loose, the tipping point
of your wheelchair is changed for the worse.
– Ensure that the bands are set correctly.
IMPORTANT!
– Do not overtighten the bands; this is to ensure
that the geometry of the wheelchair is not
changed.
IMPORTANT!
– Only ever tighten the bands when the
wheelchair is unfolded.
1648855-D
3.5.3 Backrest cover height
The backrest cover height can be adjusted for all backrest
types.
WARNING!
Risk of tipping
The hanging of additional load (back pack
or similar items) onto your wheelchair back
posts can affect the rearward stability of your
wheelchair. This can cause the chair to tip
backwards causing injury.
– Therefore, Invacare strongly recommend the
use of anti-tippers (available as an option)
when using your back posts with additional
load (back pack or similar items).
The height of the backrest cover can be adjusted on
the back posts. The adjustment must be carried out
by a qualified technician.
Product Overview
15
Advertisement
Table of Contents
