Armrests; Armrest Removable, Width And Depth Adjustable With Armpad Height And Depth Adjustable - Invacare Esprit Action 4 NG User Manual

Adjusting the height
1. Loosen wing screws C or/and D.
2. Adjust the control unit to the desired height.
3. Retighten the wing screws C or/and D.
Swivelling to the side
Your mobility device is fitted with a swing-away control unit
holder, then the control unit can be moved away to the
side, for example, to drive up close to a table.

3.5 Armrests

WARNING!
The armrest does not engage into the wheelchair.
– Therefore do not hold it in order to lift the
wheelchair.
CAUTION!
Risk of pinching
– Keep your fingers away from movable parts
during removing, fitting or adjusting the
armrest.
1640502-B
3.5.1 Armrest removable, width and depth adjustable
with armpad height and depth adjustable
Removing
1. Previously press on the locking mechanism A located at
the bottom of the armrest vertical bracket.
2. Pull the armrest by the arm cushion out of the holder.
3. To adjust how easy or difficult it is to pull the armrest
out of the holder, change the degree to which the
screws D are tightened.
Fitting
1. Push the armrest into the holder.
Adjusting the armrest width and depth (2 positions)
1. Loosen the screw F with 5 mm Allen key at bottom of
the armrest bracket.
2. Move the armrest sidewards until you reach the desired
width, while keeping screw B in place.
3. Tighten the screw F (8–9 Nm).
Components and their functions
23