Tubular Armrest, Height-Adjustable, Swiveling; Armrest, Stepless Height Adjustable, Removable - Invacare Action 3 NG User Manual

3.7.1 Tubular armrest, height-adjustable, swiveling

Removing
1. Raise the tubular armrest and pull it upwards out of
the holder.
Fitting
1. Push the tubular armrest into the holder.
Adjusting the height
1. Pull the tubular armrest out of the holder.
2. Loosen the screw on the tube of the armrest and screw
it back in at the desired height.
3. Push the tubular armrest back into the holder.
4. Perform the setting on both sides.
Swiveling
1. Raise the armrest a little and swivel it outwards.
1608467-E

3.7.2 Armrest, stepless height adjustable, removable

Removing
1. Apply the parking brake on both sides.
2. Previously press on the locking mechanism A located
at the bottom of the armrest vertical bracket (if so
equipped).
3. Pull the armrest by the arm cushion out of the holder.
4. To adjust how easy or difficult it is to pull the armrest
out of the holder, change the degree to which the
screws D are tightened.
Fitting
1. Push the armrest into the holder.
Product Overview
23