DFI WL051 User Manual page 49

MEBX Intel(R) Standard Manageability Configuration
X X
IPv4 Address
Assign a valid and available IP address to the system. Insert a value from 0.0.0.0 to
255.255.255.255 in IPv4 format.
Subnet Mask Address
Insert a value from 0.0.0.0 to 255.255.255.255 in IPv4 format.
Default Gateway Address
Insert a value from 0.0.0.0 to 255.255.255.255 in IPv4 format.
Preferred DNS Address
Insert a value from 0.0.0.0 to 255.255.255.255 in IPv4 format.
Alternate DNS Address
Insert a value from 0.0.0.0 to 255.255.255.255 in IPv4 format.
User's Manual | WL051
Network Setup
X
TCP/IP Settings
X
Activate Network Access
Select Activate Network Access and press Enter, and then press Y to activate the ME network
connection with the settings configured previously, or press N to abort.
Unconfigure Network Access
Under the Intel(R) Standard Manageability Configuration menu, select Undconfigure Network
Access and press Enter, and then press Enter to fully deactivate the ME network connection
and reset configuration to factory default. Press Y to confirm or N to abort.
Chapter 4
INTEL AMT SETTINGS
49