Trackball Assembly
trackball assembly
trackball cable
Figure 4-11. Trackball Assembly Removal
Part or Assembly Name
Optical trackball assembly
To remove the trackball assembly, follow these steps:
1. Remove the palmrest assembly.
2. Turn the palmrest assembly upside down on a flat work surface.
3. Remove screws A4 and A5.
4. Lift the trackball assembly out of the palmrest assembly.
NOTE: It is not necessary to remove the trackball button board when
removing the trackball assembly.
A5 (6 mm)
A4 (6 mm)
Order Name
SVC,ASSY,TBALL/SWT,LXPi+
palmrest assembly
6 mm
Removing and Replacing Parts
4-13