Display Assembly Hinges - Dell Latitude XPiCD User Manual
Lightweight, expandable portable computer
Hide thumbs
Also See for Latitude XPiCD:
- Reference manual (148 pages) ,
- Service manual (12 pages) ,
- Manual (6 pages)
Table of Contents
Advertisement
Display Assembly Hinges
To remove a hinge (see Figure 4-14), follow these steps:
1. Remove the display assembly from the computer.
See "Display Assembly" in Chapter 4.
2. Remove the display assembly bezel.
See "Display Assembly Bezel" in Chapter 4.
3. Remove the LCD assembly.
See "LCD Panel" in Chapter 4.
4. Remove the display-assembly interface cable.
See "Display-Assembly Interface Cable" in Chapter 4.
5. Remove the hinge covers.
See "Hinge Covers" in Chapter 4.
6. Remove the display assembly base.
See the previous subsection, "Display Assembly Base."
7. Rotate the display assembly hinges so that they point away from the
display assembly case at approximately 180 degrees.
8. To remove the hinge, remove the screw securing the hinge to the display
assembly case and disengage the hinge from the display assembly case.
Factory Repair Parts
A-19
Advertisement
Table of Contents
