3.1-V Power Supply Board
system board
Figure 4-29. 3.1-V Power Supply Board Removal
Part or Assembly Name
3.1-V power supply board
To remove the 3.1-V power supply board, follow these steps:
1. Remove the palmrest assembly
2. Remove the superpart assembly.
3. Remove the 3.1-V power supply board from the system board.
The power supply board is held in place on the system board by connectors
JPS1 and JPS2.
connector JPS1
Order Name
CRD,PWR SPLY,LXPiCD,V3.1,NBK
power supply board
with insulator
connector JPS2
bottom case assembly
Removing and Replacing Parts
4-41