Dell Latitude XPi CD Service Manual
ystem-Board Assembly Components
system board assembly
Figure A-5. System Board Assembly in the Bottom Case Assembly
To remove a part of the system board assembly, Dell recommends that you first
remove the assembly as described in "System Board Assembly" in Chapter 4.
Then follow the instructions described in the following subsections to remove
parts of the system board assembly.
To remove and replace the system board, transfer the following items from the
system board assembly to the replacement system board assembly:
Any installed memory modules — See "Memory Modules" in Chapter 4.
Keyboard/keypad/mouse connector shield — See the next subsection,
"Keyboard/Keypad/Mouse Connector Shield."
I/O interface cable — See "I/O Interface Cable" found later in this
I/O board — See "I/O Board" found later in this section.
I/O docking EMI clip
bottom case assembly