Dell Latitude XPiCD User Manual page 50

4-12 Dell Latitude XPi CD Service Manual
To reseat the palmrest assembly on the bottom case assembly, set the palmrest
assembly down, slightly forward of its original position, on top of the bottom
case assembly. Then push down on all sides of the palmrest assembly while
sliding the assembly toward the back of the computer.
Ensure that the palmrest assembly is properly aligned and fully seated on the
bottom case assembly and that all of the mounting tabs are fully engaged. Then
close the display assembly, turn the computer upside down on the work surface,
and reinstall retaining screws A1, A2, and A3 (see Figure 4-10).
CAUTION: Be careful not to bend the CD-ROM EMI clip. Set the palm-
rest assembly top side down, when the palmrest assembly is free from
the bottom case assembly.