4-26
Dell Latitude XPi CD Service Manual
Display-Assembly Interface Cable
I1 (5 mm)
retaining bracket
bobbin
alignment marks
on cable
Figure 4-20. Display-Assembly Interface Cable Removal
Part or Assembly Name
LCD cables, active-matrix, TFT
SVGA display (includes display-
assembly interface, LED board, and
LCD-inverter-board interface
cables)
The display-assembly interface cable connects the system board, LCD panel,
LCD inverter board, and LED board. The cable wraps around a bobbin. To
remove the display-assembly interface cable, follow these steps:
1. Remove the display assembly.
2. Remove the display assembly bezel.
3. Remove the LCD panel.
4. Remove the left hinge cover.
5. Remove screws I1 and I2 securing the display-interface cable retaining
bracket, then remove the bracket.
6. Disconnect the display-assembly interface cable from ZIF connector
CN1 on the LCD inverter board.
I2 (5 mm)
display-assembly interface cable
alignment notch
in shoulder
Order Name
SVC,CBL,LCD,TFT,SAMSUNG,
LXPiCD
connector CN1
5 mm
LED board