Alarms And Messages - Deltec CADD-Prizm VIP CONTIN 6100 Patient Information

Infusion pumps; continuous delivery mode
Table of Contents

Advertisement

Alarms and Messages

If there are alarms or special messages you need to be aware
of, the pump will beep or sound an alarm. Look at the screen
and follow the steps in this table, or press
When you see:
9 volt Battery
Low
NEXT to continue
9 volt Battery
Depleted
Install good battery
(blank display or
random characters)
Cassette Damaged
Free flow may occur
Clamp Tubing
NEXT to silence
Air in line detected
Pump will not run
NEXT to silence
Take this action:
The 9 volt battery is low but the
pump is operable. Change the
9 volt battery soon.
Install a new 9 volt battery. The
pump will not run with a de-
pleted 9 volt battery. A good
battery must be installed even
when an external source of
power is connected.
A two-tone alarm is sounding
and the amber light stays on.
The 9 volt battery is depleted.
Install a new battery.
The pump detects the cassette is
damaged. Close the tubing clamp
and inspect the cassette for
damage. Replace it if necessary.
There is air in the tubing or the
tubing is not threaded through
the air detector. Press
the alarm. Then follow your
clinician's instructions for priming.
Å
for help.
to stop
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cadd-prizm vip contin 6101

Table of Contents