Technical Data; Accessories And Spare Parts; Transport And Storage; Installation - oventrop Unibox T RTL Operating Instructions Manual

Accessories and spare parts

3.6 Technical data

max. operating tempera-
ture ts
max. operating pressure ps
max. differential pressure
Installation depth
Thermostat connection
thread
Fluid
4. Accessories and spare
parts
Spare parts and accessories are available from
specialist stores.
The following items are available as accessory:
Name
Cover plate Plastic white
Glass white
Glass black
Fixing channel
Pipe conduit unit
Duo connection piece
Protective tube (see Illustr. 7 on
page 31)
5.

Transport and storage

Transport the product in its original packaging.
Store the product under the following condi-
tions:
Temperature
-20 °C to +60 °C
range
Relative air
Max. 95 %
humidity
Particles
Dry and free from dust
30
Mechanical
influences
100 °C
Radiation
10 bar
Chemical influ-
1 bar
ences
57 mm
M30x1.5
6.
Water, water/
glycol mix-

6.1 General installation advice

ture
Note the following prior to installation:
• The lower edge of the "Unibox T RTL" must
be at least 20 cm above the finished floor.
• The front edge of the "Unibox T RTL" must
be level with the finished wall.
Item
number
• The opening of the wall box unit must face
1022776
downwards.
1022774
• The thermostat must not be influenced by
1022775
other heat sources.
1022652
• Use the enclosed brackets to align and fix
the "Unibox T RTL".
1022653
1022650
1022655
1501184
Protected from mechani-
cal agitation
Protected from UV rays
and direct sunlight
Do not store together
with solvents, chemicals,
acids, fuels or similar
substances

Installation

Should the wall not have been
finished, take the plaster and tile
thickness into account.
Unibox T RTL
102273380-V01.06.2019