Replacing The Diskette Drive (Mini Tower Chassis) - Dell Precision 330 Service Manual

R e m o v i n g t h e D i s k e t t e D r i v e f r o m t h e B r a c k e t ( M i n i To w e r
C h a s s i s )
screw

Replacing the Diskette Drive (Mini Tower Chassis)

Mount the diskette drive on the bracket:
1
Lower the right side of the diskette drive onto the bracket,
a
inserting the drive retention pins into the screw holes on the drive.
See "Removing the Diskette Drive from the Bracket (Mini Tower
Chassis)."
Lower the left side of the diskette drive downward and secure it to
b
the bracket with the screw you removed in
Diskette Drive (Mini Tower
Slide the drive assembly into the chassis until the green diskette-drive
2
bracket release button snaps securely into place. See
Diskette-Drive Bracket (Mini Tower
Connect the interface cable for the drive. To locate this connector, see
3
"System Board Components" or
drive
drive bracket
step 6 of "Removing the
Chassis)."
"Removing the
Chassis)."
"Interior Service Label."
drive retention pins (2)
D i s k D ri ve s a n d M e d i a
81