R e m o v i n g a H a r d D r i v e f r o m t h e B r a c k e t ( D e s k t o p C h a s s i s )
Replacing a Hard Drive (Desktop Chassis)
Slide the drive into one of bracket bays, oriented so that the
1
connectors on the back of the drive will face the interior of the chassis
when the bracket is reinstalled.
NOTE:
Orient the drive in the bracket so that its bottom will face the left
side of the chassis when the bracket is installed in the chassis.
Align the screw holes of the drive and bracket, and secure the drive in
2
the bracket using the screws that came with the upgrade kit. See
"Removing a Hard Drive from the Bracket (Desktop
drive bracket
drive
screws (4)
Chassis)."
D i s k D ri ve s a n d M e d i a
75