Removing the Diskette Drive (Desktop Chassis)
CAUTION:
Before you perform this procedure, see
Measures."
NOTICE:
Before disconnecting a peripheral from the system or removing a
component from the system board, verify that the standby power indicator on
the system board has turned off. To locate this indicator, see
Components" or
"Interior Service
Turn off the computer and peripherals, disconnect them from their
1
electrical outlets, wait at least 5 seconds, and then
computer
cover.
Rotate the power supply
2
Disconnect the DC power and interface cables from the back of the
3
drive.
Press the green diskette-drive bracket release button and slide the drive
4
assembly out of the chassis (see the following figure).
Label."
away from the system board.
"Precautionary
"System Board
remove the
D i s k D ri ve s a n d M e d i a
65