Table of Contents
Advertisement
Pro:Centric Java Application Setup
The Pro:Centric Java (GEM) application operates in conjunction with FTG and PPV Modes. This section
provides an overview of the setup required for the Pro:Centric features. Administration and management
options for the Pro:Centric server are described in detail in the Pro:Centric Server Admin Client
User Guide. This document describes only those settings that must be specified on the TVs to enable
Pro:Centric remote management and/or the Pro:Centric Java application.
• Remote management (TV E-Z Installation): The Pro:Centric Admin Client provides remote management
facilities for downloading boot logo image and software updates as well as facilities for downloading a
Clone/Configuration (.tlx) file for FTG Mode configuration.
• Pro:Centric Java application: The application comprises the Pro:Centric interactive menus/features
described on page 11. Pro:Centric application settings are managed via the Pro:Centric Admin Client
for the Java application.
The Pro:Centric remote management facilities and application download are based on Installer Menu
item settings that are used to set up the TV's Pro:Centric features. The Installer Menu / Pro:Centric server
settings can be configured using one of the methods described below.
TV in Factory Default State
When the TV is in a factory default state, LG's First Use Wizard provides automated or manual options
for configuring the TV's Pro:Centric server settings. See "First Use Wizard" on pages 16 to 17 for further
information. The First Use / EZ-Manager Wizard (i.e., Solution Settings) also provides a USB configuration
option that enables you to configure a TV for FTG Mode using a Clone/Configuration (.tlx) file stored on a
USB memory device. The ".tlx" file incorporates FTG Installer Menu settings, including Installer Menu items
098 PRO:CENTRIC and 119 DATA CHANNEL, which are used to set up the TV's Pro:Centric features.
TV in Pass-through Mode
If the First Use Wizard has been exited and the TV is in Pass-through Mode, either:
• Set Installer Menu items 098 PRO:CENTRIC and 119 DATA CHANNEL to the appropriate values.
See Installer Menu information on pages 38 to 48 for further details. Also, as necessary, refer to
"Custom Master TV Setup" on pages 49 to 51 and/or cloning information on pages 52 to 58.
• Configure the appropriate Pro:Centric server settings in the IP Environment / Pro:Centric Menu. You
must use this option, in particular, if you wish to configure IP settings for the Pro:Centric server. See
"Accessing the IP Environment Menu" on page 65 and "Pro:Centric Setup" on pages 70 to 72 for further
information.
Note: When the TV is in either Pass-through Mode or FTG Mode, you can also leave Installer Menu item
119 DATA CHANNEL set to its default value (255) to enable the TV's Data Channel Auto Search feature to
set the DATA CHANNEL value. See item 119 description on page 47 for additional information.
TV in FTG Mode
If the TV is already in FTG Mode, use the Cloud Configuration Tool to update Installer Menu items #98
Pro:Centric and #119 Data Channel (along with their affiliated fields). Then, transfer the FTG Installer
Menu settings to the TV. Refer to the FTG Mode overview on pages 7 to 8 for further information on FTG
Mode operation and configuration. Also, see note above regarding the option to use the TV's Data Channel
Auto Search feature to set the DATA CHANNEL value.
206-4354
Pro:Centric Operation (Cont.)
13
Advertisement
Table of Contents
