Technical Data - S+S Regeltechnik THERMASGARD TM54 Series Operating Instructions, Mounting & Installation

G
THERMASGARD ®
Calibratable temperature sensor THERMASGARD
output, and separate stainless steel immersion sleeve for heavy-duty applications. This immersion sensor is used for the detection of temperatures
in liquid or gaseous media. Applications in piping systems, in heating technology, in storage tanks, in district heating compact stations, in hot and
cold-water systems, in oil and lubricant circulation systems, in mechanical, apparatus and plant engineering as well as in the entire industrial sector.
These temperature transmitters are factory-calibrated. Adjustment ⁄ fine adjustment by the user is possible (range and zero point are adjustable).

TECHNICAL DATA

Power supply:
Working resistance:
Load resistance:
Power consumption:
Sensor:
Measuring ranges:
Deviation, temperature:
Output:
Ambient temperature:
Connection type:
Protective tube:
Dimensions:
Electrical connection:
Connecting head:
Humidity:
Protection class:
Protection type:
Standards:
ACCESSORIES
MF-06-M
TH-ms ⁄ xx
TH-VA ⁄ xx
TH-VA ⁄ xx ⁄ 90
THERMASGARD ® TM 54
Type ⁄ WG01
TM 54 - I
T M 5 4 - I 5 0 M M
T M 5 4 - I 10 0 M M
T M 5 4 - I 15 0 M M
T M 5 4 - I 2 0 0 M M
T M 5 4 - I 2 5 0 M M
T M 5 4 - I 3 0 0 M M
T M 5 4 - I 3 5 0 M M
T M 5 4 - I 4 0 0 M M
TM 54 - U
T M 5 4 - U 5 0 M M
T M 5 4 - U 10 0 M M
T M 5 4 - U 15 0 M M
T M 5 4 - U 2 0 0 M M
T M 5 4 - U 2 5 0 M M
T M 5 4 - U 3 0 0 M M
TM 54
® TM 54 with eight switchable measuring ranges, connecting head made of aluminium, continuous
24 V AC ⁄ DC (± 10 %) for U variant
15...36 V DC for I variant, depending on working resistance, residual ripple stabilised ± 0.3 V
R (ohm) = (U -14 V) ⁄ 0.02 A for I variant
a b
R > 5 kOhm for U variant
L
< 1.0 VA ⁄ 24 V AC ⁄ DC; < 0.55 VA ⁄ 24 V DC
Pt1000, DIN EN 60571, class B (Perfect Sensor Protection)
multi-range switching with 8 switchable measuring ranges,
see table (other ranges optional)
T = +150°C with manual zero point correction (± 10 K)
typically ± 0.2 K at +25 °C
0 - 10 V or 4...20 mA
measuring transducer –30...+70 °C
2- or 3-wire connection
stainless steel, V4A (1.4571) Ø = 6 mm, inserted length (EL) = 50 - 400 mm (see table)
see dimensional drawing
0.2 - 1.5 mm 2 , via push-in terminal
form B, material aluminium, colour white aluminium (similar to RAL 9006), M 20 x 1.5
< 95 % r. H., non-precipitating air
III (according to EN 60 730)
IP 54 (according to EN 60 529),
IP 65 (optional)
CE conformity, electromagnetic compatibility according to EN 61 326,
EMC directive 2014 ⁄ 30 ⁄ EU
Mounting flange, metal, galvanised steel, Ø = 32 mm,
Ø = 6.3 mm tube gland, T
Immersion sleeve, brass, nickel-plated,
Ø = 8 mm, T = +150 °C, p
max
Immersion sleeve, stainless steel, V4A (1.4571),
Ø = 8 mm, T = +600 °C, p
max
Immersion sleeve, stainless steel, V4A (1.4571), with neck tube (90 mm),
Ø = 8 mm, T = +600 °C, p
max
Temperature measuring transducers (basic device)
Sensor Output
Pt1000 4...20 mA
Pt1000 4...20 mA
Pt1000 4...20 mA
Pt1000 4...20 mA
Pt1000 4...20 mA
Pt1000 4...20 mA
Pt1000 4...20 mA
Pt1000 4...20 mA
Pt1000 0 - 10 V
Pt1000 0 - 10 V
Pt1000 0 - 10 V
Pt1000 0 - 10 V
Pt1000 0 - 10 V
Pt1000 0 - 10 V
= +700 °C
max
= 10 bar
max
= 40 bar
max
= 40 bar
max
Inserted Length (EL)
50 mm
100 mm
150 mm
200 mm
250 mm
300 mm
350 mm
400 mm
50 mm
100 mm
150 mm
200 mm
250 mm
300 mm
Rev. 2019 - V20
Item No.
IP 54, I - variant
1101- 7152-001 9-910
1101- 7152-002 9-910
1101- 7152-003 9-910
1101- 7152-004 9-910
1101- 7152-005 9-910
1101- 7152-006 9-910
1101- 7152-007 9-910
1101- 7152-008 9-910
IP 54, U - variant
1101- 7151-001 9-910
1101- 7151-002 9-910
1101- 7151-003 9-910
1101- 7151-004 9-910
1101- 7151-005 9-910
1101- 7151-006 9-910