Time Settings - TP-Link Archer C54 User Manual

Chapter 5
• Tracert is used to display the route (path) your router has passed to reach the
tested host, and measure transit delays of packets across an Internet Protocol
network.
2 ) Enter the IP Address
3 ) Modify the Ping Count
keep the default value.
4 ) If you have chosen Tracert, you can modify the
recommended to keep the default value.
4. Click START to begin the diagnostics.
The figure below indicates the proper connection between the router and the Yahoo
server (www. Y ahoo.com) tested through Ping.
The figure below indicates the proper connection between the router and the Yahoo
server (www. Y ahoo.com) tested through Tracert.
5 7

Time Settings

This page allows you to set the time manually or to configure automatic time
synchronization. The router can automatically update the time from an NTP server via
the internet.
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to System > Time.
Configure the Router in Access Point Mode
or Domain Name of the tested host.
number and the Ping Packet Size. It's recommended to
Traceroute Max TTL. It's
71