Internet - TP-Link Archer C54 User Manual

Chapter 4
• LAN - This field displays the current settings of the LAN, and you can configure them
on the Advanced >
• MAC Address
• IP Address - The LAN IP address of the router.
• Subnet Mask
• DHCP Server - This field displays the current settings of DHCP (Dynamic Host
Configuration Protocol) Server, and you can configure them on the
Server page.
• DHCP Server
enabled by default and the router acts as a DHCP server.
• IP Address Pool
addresses.
• Dynamic DNS - This field displays the current settings of the Dynamic DNS (Domain
Name System), and you can configure them on the
DNS page.
• Service Provider
• Host Name - The Domain Name you have entered in the
• Status - The status of the Dynamic DNS service conenction.
4 2 2

Internet

1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced >
3. Set up the internet connection and click SAVE.
Dynamic IP
If your ISP provides the DHCP service, please select
automatically get IP parameters from your ISP.
Click Renew to renew the IP parameters from your ISP.
Click Release to release the IP parameters.
Network > LAN page.
- The physical address of the router.
- The subnet mask associated with the LAN IP address.
- Indicates whether the DHCP server is enabled of disabled. It is
- The IP address range for the DHCP server to assign IP
- The Dynamic DNS service provider you have signed up for.
Network > Internet.
Configure the Router in Wireless Router Mode
Advanced > Network
Dynamic DNS
Dynamic IP, and the router will
Network > DHCP
> Dynamic
page.
19